Electrical | Solar | COC Inspections

EV Charger Installation Gauteng | Anictom

EV Charger Installation

Anictom is qualified and authorised to install home and business EV charging points across Gauteng. Every installation is wired correctly, load-tested, and fully compliant with SANS 10142-1. Where the property holds a current valid Certificate of Compliance, a COC is issued for the new EV charger circuit on completion — so your charger is safe, insurer-accepted, and ready to use from day one.

Book a site assessment

Why Install a Dedicated Home Charger?

Plugging an EV into a standard wall socket works, but it’s slow, puts unnecessary strain on household wiring, and isn’t designed for the sustained draw of overnight charging. A dedicated charging point is safer, faster, and properly load-balanced against the rest of your installation.

  • Faster charging — a dedicated Level 2 charger charges 4–6× faster than a standard 15A plug
  • Safer wiring — correctly sized dedicated circuit, breaker protection, and earth leakage protection installed to SANS 10142-1
  • COC on completion — a Certificate of Compliance is issued for the EV charger circuit where the property holds a current valid COC, giving insurers and banks what they need
  • Solar-ready — we assess whether your existing solar or off-grid system can handle the additional EV load, and advise on upgrades if needed

Charger Types We Install

Level 1
2.2kW
13–15 km/hr
range added per hour
Dedicated 15A circuit. Good for low daily km or as a secondary point. Most economical install.
RECOMMENDED
Level 2
7.4kW
40–50 km/hr
range added per hour
Dedicated 32A circuit. Most EVs charge from near-empty to full overnight. Standard for daily drivers.
Three-Phase
11–22kW
Full charge
in 2–4 hours
For three-phase properties and business fleet charging. Thomas is rated to work on three-phase installations.

How It Works

1
Site Assessment
DB capacity, cable routes & solar compatibility checked. COC status confirmed.
→
2
Quote & Planning
Clear fixed quote covering circuit, DB upgrades if needed, and cable routing. No surprises.
→
3
Installation
Dedicated circuit run from DB to charger. Correct cable sizing, breaker & RCD to SANS 10142-1.
→
✓
Test & COC
Full testing. COC issued where property holds a current valid COC for the existing installation.

Free EV Calculators

Before you commit to a charger installation, find out exactly what home charging will cost you per month vs petrol — and whether your existing solar system can handle the additional load.

💰 Monthly charging cost vs petrol

Enter your monthly km, EV efficiency, and Eskom tariff to see exactly what home charging costs — and how much you save vs petrol.

Try the cost calculator →

☀️ Can my solar handle EV charging?

Enter your inverter size, battery capacity, and daily km to find out if your existing solar or off-grid system can handle the additional EV charging load.

Try the solar calculator →

Ready to install your EV charger?

Book a free site assessment with Thomas — we’ll confirm your DB capacity, cable route, and solar compatibility before a single bolt is turned.

Book a free site assessment