COC Inspections Pretoria East | Anictom

COC Inspections & Compliance

Anictom inspects every installation against SANS 10142-1 — not just our own work, but existing systems too. If you need a Certificate of Compliance for a property sale, an insurance claim, or peace of mind, our team brings an inspector’s eye to every job.

Why a COC Matters

A Certificate of Compliance is a legal requirement for property transfers in South Africa, and it’s often the first thing an insurer asks for after a claim. An out-of-date or non-compliant installation can delay a sale, void an insurance payout, or put people at real risk.

  • Required by law for property sales and transfers
  • Often required by insurers before a claim will be honoured
  • Confirms your installation is safe for occupants, staff, and visitors
  • Protects you legally if something goes wrong down the line

What We Inspect

Our inspections follow SANS 10142-1, covering the areas most often missed by general installers.

Distribution Boards

Enclosure condition, labelling, main switch, overcurrent and RCD protection, surge protection.

Earthing & Bonding

Earth electrode condition, main bonding to metallic services, supplementary bonding in bathrooms.

Wiring & Terminations

Cable sizing, colour coding, joint enclosures, and termination quality throughout the installation.

Special Locations

Bathroom zones, pool areas, and outdoor installations checked against their specific IP and bonding requirements.

Testing

Insulation resistance, polarity, and RCD trip-time testing using calibrated instruments.

Geyser & Appliance Circuits

Dedicated circuits, correct breaker type, local isolation, and earthing on geysers and major appliances.

Preparing for Your Inspection

A bit of preparation on the day can save time and avoid a return visit. Here’s what to check beforehand.

Electrical

  • Ensure we have access to every room, garage, and outbuilding
  • Unlock all distribution boards and have keys on hand – covers must be removable
  • If on prepaid metering, make sure there’s enough credit loaded for testing
  • Replace blown bulbs – every room needs at least one working light
  • Refit any missing light covers and remove redundant or temporary leads
  • Note: appliances, globes, and motors themselves aren’t covered by the certificate – only how they connect to the installation

Solar & Inverter

  • Have your existing electrical COC on hand – a solar or backup system inspection references it
  • Ensure inverter, battery, and DB enclosures are accessible and unlocked
  • Note any recent changes to the system since installation, including generator additions

How It Works

A clear process from booking through to certificate, including what happens if the installation isn’t compliant yet.

1. Request

You, your agent, or your attorney get in touch with the property details and reason for inspection – sale, insurance, or general peace of mind.

2. Site Visit

We schedule a time, inspect the installation in full against SANS 10142-1, and carry out all required testing on site.

3. Outcome

If everything passes, we issue your Certificate of Compliance immediately. If not, you’ll get a written report and a quote for the repairs needed.

4. Certificate Issued

Accept our quote and we’ll complete the repairs and issue the certificate, or use your own registered contractor – either way, you end up compliant.

Good to know: the inspection fee is payable on the day regardless of outcome. If repairs are needed and you accept our quote, a deposit will be required before repairs will commence. We don’t issue certificates for work completed by other contractors, since the COC is also our guarantee on that workmanship.

Need a Certificate of Compliance?

Get in touch with Anictom for a fast, thorough inspection — backed by 13 years of hands-on electrical experience.